Home  |  About Us  |  Products  |  Technical  |  Applications  |  Re-lubrication  |  News/Offers  |  Contact  |  Links
 
 

Taper O.D Bearings
(Imperial series for shaft sizes from 0,125" to 0.3125")

Taper O.D. bearings have a flange on the outer ring, an extended or wider inner ring and an outer ring that is slightly tapered for fitting into soft steel or sheet metal. Taper O.D. bearings are most commonly available in SAE52100 Chrome Steel but some sizes may be available in stainless steel. They can withstand heavy radial loads and moderate thrust loads in both directions.

  
 



Bore

O.D.
Flange
O.D.
r.min.
(mm)
Outer
Width
Inner
Width
Flange
Width
OD Taper per foot

SMB Ref.
Max Load kgf
Dyn. Stat.
Dimensions in inches except radius
0.125 0.3757 0.438 0.3 0.163 0.188 0.037 0.075 F2ZZ 30 13
 
0.1875 0.4375 0.5 0.3 0.163 0.188 0.042 0.075 F2V 104 59
0.5632 0.625 0.3 0.163 0.188 0.042 0.068 F3ZZ 63 30
 
0.25 0.6257 0.687 0.3 0.226 0.25 0.042 0.068 F4ZZ 70 34
 
0.3125 0.6882 0.75 0.3 0.226 0.25 0.042 0.068 F5ZZ 168 62

 

FREE counter and Web statistics from sitetracker.com